Light Vehicle Training Simulator
Enquire Now


Light Vehicle Training Simulator & Mining Safety Training

The Light Vehicle Training Simulator is an essential tool designed to train mining drivers on how to drive safely on a mine site and respond to emergency situations. Built on a 4WD vehicle, the simulator is designed to operate as either a right or left-hand drive. The light vehicle training simulator comes with fully operational manual automatic/transmission and actual vehicle controls. The simulator incorporates highly realistic mine sites with dynamic environments of a mine site including day and night operations and driving in rain or dust. The light vehicle simulator allows accurate screening, training and up-skilling of operators in a safe environment.

Light Vehicle Training Simulator


Convertible Kits

The Light Vehicle Simulator is compatible with convertible kits. Convertible kits are interchangeable equipment kits that fit onto base simulator platforms allowing the customer to use a range of different equipments on the same simulator. Convertible kit change on the simulator takes about 15-20 minutes.


Applications of Mine Site Driver Training & Light Vehicle Training Simulator

Excavator Simulator

Hazard Identification

Wheel Loader Simulator

Accident Avoidance

Excavator Simulator

Gear Management

Light Vehicle Training Simulator

Mine Site Familarisation

Light Vehicle Training Simulator

Vehicle Maintenance Training


Supported OEMs for Light Vehicle Training Simulator


Product Range

Haul Truck Simulator
Low Medium Simulator

Low Fidelity Simulators

Low fidelity compact and portable simulator designed for driving schools equipped with comprehensive training modules for basic training.
Dump Truck Simulator
Medium Fidelity Simulator

Medium Fidelity Simulators

Medium fidelity simulator with instructor station compatible with multiple display options and motion platforms. Designed for training on both basic and advanced modules.
Haul Truck Simulator
High Fidelity Simulator

High Fidelity Simulators

High Fidelity simulator with advanced instructor station, motion system and 180 Deg. Curved projection display. Designed to deliver critical training and build efficiency.
Dump Truck Simulator
VR Training Solutions

VR training Solution

Light Vehicle Simulator is compatible with VR Display. Pre-employment screening, familiarization training, safety training, and confidence building are among VR training modules.


Software Features

Virtual Mine Environment

Training Modules

Testing & Evaluation

Instructor Software

Group Training

Virtual Mine Environment

Virtual Mine Environment

Virtual Mine Environment

TecknoSIM Light Vehicle training Simulators are delivered with a highly realistic, virtual mine sites, complete with artificially intelligent equipment such as haul trucks, shovels, excavators, loaders and light vehicles to support the driver training and evaluation process. Real-time weather like rain, snow, fog, dust and daylight conditions add to the realism. Artificially intelligent traffic in the virtual mine site helps operator practice in normal and risky conditions. Clients can create customized mine sites that simulate actual mine sites, including roads, pits, crusher sites, parking lots, and other features

Training Modules

Training Modules

Heavy Vehicle Simulator

Light vehicle simulator has progressive training modules to suit for new and experienced drivers. Special modules are available to train drivers on mine site familiarisation, blind spot training, night time driving, driving in difficult weather conditions. Depending on the client’s requirements, a training module is created and designed in a variety of languages.

Testing & Evaluation

Testing and Evaluation for Mine Site Driver Training & Light Vehicle Training Simulator

In real-time, the simulator evaluates drivers based on their driving skills, violations, defensive situations, and driving behavior.  The simulator generates a detailed driving evaluation report for each driver at the end of the scenario. The record and replay feature allows the instructor to replay the scenario and train the drivers on their mistakes.

Instructor Software

Truck Driving Simulator

Instructor Software

The instructor software is designed to enable the instructor to register each driver and plan his training. The software allows the instructor to set different driving situations, inject faults like a tire blowout, worker crossing, dust and other distractions. The real-time view of the driver screen and advanced reporting system gives full control to the instructor to make his training productive.

Group Training

Truck Driving Simulator

Group Training

Multiple simulators have connected to a single instructor to allow training operators in a group. Trainers can manage multiple simulators simultaneously, so they can train several operators at the same time for a lower cost.


Hardware Features

Driving Station

Display System

Motion System

Instructor Station

Driving Station

Driving Station

Driving Station

Driving cab of a TecknoSIM Light Vehicle simulator is based on a standard vehicle with a seat and vehicle controls as seen in the actual vehicle. All controls surrounding the seat are fully functional, including the steering wheel, pedals, gears, and instrument cluster. The Driving Cab consists of a soft instrument panel that mimics real controls and instruments. Using any OEM console, you can configure this simulator. In addition, it can also accommodate multiple vehicle types in the same hardware system

Display System

Display System

The visual system with high definition graphics is a key component of the training simulator. A properly designed visual system increases the level of realism and immerses the operators in real world mining environments. The display system of mining simulators are available in multiple options of single screen display of 32″, three 32″ screen display, Curved screens with multiple projectors for a seamless 180-degree display. To operate with other machines additional screens are provided for blind spots and rear view

Display System
Display System
Display System

Motion System

Motion System

Motion System

TecknSIM Mining Simulators offer an integrated motion system based on electric actuators that makes it compact and low on maintenance. The motion system provides accurate feedback required for a realistic operating experience on a mine site. It is programmed to provide cues and feedback with sensations of steering, acceleration, braking, turning, jerks, gradients, tires and soil interaction. Motion systems are available in options of three degrees of motion (3DOF) and six degrees of freedom (6DOF) Motion Platforms.

Instructor Station

Heavy Vehicle Simulator

Instructor Station

The instructor station controls the operator cab and allows trainers with the following options:

  • Managing database of trainees and instructors
  • Controlling multiple simulators
  • Creation of new exercises
  • Modifying the environment in a running session
  • Injecting vehicle faults in a running session
  • Record and replay of saved sessions
  • Managing performance evaluation reports
  • Calibration of simulators


Related Products

Dump-Truck-Simulator-header

Dump Truck and Haul Truck Simulator

Dump Truck and Haul Truck Simulator

Surface Drill Rig Simulator

Surface Drill Rig Simulator

Excavator Simulator

Excavator Simulator

Excavator Simulator

Wheel Loader Simulator

Wheel Loader Simulator

Wheel Loader Simulator

Dozer Simulator Training

Dozer Simulator

Dozer Simulator

Tipper Training Simulator

Tipper Simulator

Tipper Simulator

Custom Mine Sites

Custom Mine Sites

Virtual Reality Training Solutions

Virtual Reality Training Solutions


News

Tecknosim VR training prepares workers for entry into confined spaces 1366 697 Tecknotrove

Tecknosim VR training prepares workers for entry into confined spaces

Safety in the mining industry is a vital issue. Many workers are injured in mine-related accidents and some die every day.

read more
Tecknotrove develops India’s first electric dump truck simulator for BEML 681 393 Tecknotrove

Tecknotrove develops India’s first electric dump truck simulator for BEML

BEML, the largest manufacturer of construction and mining equipment in India, recently installed a TecknoSIM dump truck simulator to train drivers and operators engaged in mining operations in Mysore.

read more
More News
Enter your
text here
en English
ar Arabicbn Bengalien Englishtl Filipinofr Frenchde Germanhi Hindiid Indonesianpt Portugueseru Russianes Spanish
close slider

    Sales Details

    +91 22 61513002

    sales@tecknotrove.com

    Enquire Now